V-Notch Triple Wall Corrugated Box

V-Notch Triple Wall Corrugated Box

Triple-wall corrugated sheets can be manufactured in a way that they can be shipped as flat sheets and effortlessly folded into a 3-, 4-, 5-, or 6-panel box on site as needed. Using a specially designed v-notching machine, blades cut two 45 degree angles between the flaps of the box; when folded, the flaps form a perfect 90 degree angle. During the manufacturing process, the blades cut out two of the three layers of the Triple-Wall board, leaving one single wall intact at the corners. Standard scoring does not give the clean, straight out-side edge on triple-wall corrugated that our v-notch machine can produce. The ends of the boxes are completed with solid 2 inch heat treated lumber.

Standard scoring does not give the clean, sharp edge on triple-wall corrugated that our v-notch machine can produce. The corrugated sheets can be up to 300 inches long (25 feet) and 72 inches wide (6 feet).

The corrugated sheets can be up to 300 inches long (25 feet) and 72 inches wide (6 feet). The V-Notch Box is designed to accommodate the extreme length of tubes, rods, pipes, and gaskets through its cross-section. Reinforcement can be added with custom designed wood pallets/skids when necessary.

Go to Top